Best type of Brantz sensor for a Mini?

I'm looking at fitting a Brantz sensor to a Mini. I'm curious to know what others have done. I'm more inclined to go for a wheel sensor but I'm not sure where the best place to fit it is.

Any advice welcome Smile

I put mine one the back wheel so wheel spin wont effect it. As far as I can remember I made a little mounting bracket and welded it to the backplate, so that it senses the back of the wheel studs (on the inside of the hub).

Thanks Damian, I never thought to check for mounting locations on the back but it makes more sense. I'll have a look over the weekend and see if I can find a spot before ordering the part.

I think I but it down the bottom to avoid springs etc

	Damien wrote:
	I think I but it down the bottom to avoid springs etc

Also the cable from the Wheel Sensor should be protected from flying debris by placing inside Plastic Tubing. (I used Beer Line Tubing)

_________________
Eoin